Mobile

  Information Labs

    

5
 
  Site map About Us Help Contact Us Resources  

 

 

 

 

 

 

 

   

Mounting the Control Module

 

Mount the control module under the dash. We don’t recommend mounting the control module under the seat

Or anyplace were a would be  thief could gain access to the module removing the plug and its power. the optimal place for mounting the security model is as high as possible under dash. usually the best place to is under the needle circa or the panel right below the knees, as most vehicles allow removal of this panel.

Also keep in mind that many security system models on the market today will have to adjust months such as shock sensor ajasments that you may want to gain access to them and if future. always amount module temporarily where you have decided it will go. this is important as it will enable all wires from the plug the two reach their destination throughout the vehicle. for example,

if wiring of the unit with module on the floor you may find that the module will not reach the desired location you chose to be for the installation. most manufacturers to recommend that you wire tie the module to a wiring harness on the vehicle .  This is to do two the stock sensor to that is incorporated inside the module .  This module is designed to ants short in PACs corporate King a windows door glass .  Consult your owner's manual or inspect module to 40 any unjust months to two verify that your module has this feature .  If your module does not have to a built in shock sensor to it is recommended that you simply screw the module to any metal or plastic part of a the vehicle. remember !  Always melt module to in a place where it is difficult to access once all panels to are on.

 

 
 
 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

Google

 

Help About Us Site map Contact Us Link to us Links

Copyright © 2001 - 2012 Mobile Information Labs.com